Fisher & Paykel OB60 Upper oven door Replacing the inner pane of glass

53
Care and cleaning
A
D
G
E
F
H
Upper oven door
Replacing the inner pane of glass
1 Replace the inner pane:
Check that the four rubber pads are in
place (“D” in Fig. 56a).
Check that you are holding the pane the
correct way. You should be able to read the
wording on it as it faces you.
Insert the pane in the left “E” and right “F”
slide guides (Fig. 56b), and gently slide it to
the retainers “H” (Fig. 56c).
Replace the seal “G” by hooking in the
three fixing hooks. Make sure that you put
it in the correct way. (Fig. 56d)*.
2 Unlock the oven door by opening it
completely and closing the lever “A” on the
left and right hinges (Fig. 56e).
*
Note: the gap between the top edge of
the inner glass and the sealed gasket is to
allow air circulation (Fig. 56f).
Fig.56b
Fig.56c
Fig.56dFig.56e
Fig.56f
Fig.56a
G