Fisher & Paykel OB60SL11DEPX1 quick start Setting the Clock, Your Oven, Control Panel First USE

QUICK START GUIDE

Built-in oven

NZ AU GB IE

SETTING THE CLOCK

You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.

Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock setting. If you want to set the clock later, follow the steps under ‘To change the time’.

Keep this document handy for easy reference.

For detailed information on the other features of your oven, see your ‘User guide’.

Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.

When the oven is first switched on at the wall

To change the time

(within the user preference menu)

YOUR OVEN

OB60SL11DCPX1

OB60SL11DEPX1

1Control panel

2Oven vent louvres

3Step down oven wire shelf

4 Oven light

5 Telescopic sliding shelf (x2)

6 Side rack

7 Oven wire shelf

8 Oven door and handle

9 Oven seal

Accessories:

10Meat probe

11 Grill rack

12Smokeless grill tray

13Deep Roasting dish

14Flat baking tray

1	9	10
2		11
		12
3		13
4
5
6		14
7

8

1 The display will flash 24 Hr.	2a	Press the right scroll button to scroll
		between 24 Hrand 12 Hr
	2b	Press the select	button to confirm.

3 Press the left and right scroll	4 Press the select	button to
buttons to set the time.	confirm.

1Press and hold the left and right scroll

buttons together for 3 seconds to enter the user preference menu.

The display will either show 12 Hror 24 Hr

2Press the select button to confirm. The display will flash.

3Follow steps 2-5 left to set the time.

At step 2a, you also now have the ability to scroll between 24 Hr,

12 Hr and OFF (turns the display off). Refer to the User guide to learn more about this feature.

THE CONTROL PANEL

FIRST USE

Function indicators		Function dial		Temperature	Temperature		Temperature
(see ‘Oven functions’)	Function halo			indicator			dial
					halo
			FUNCTION			TEMPERATURE

Your oven comes with one wire shelf, two telescopic sliding shelves and a drop down wire shelf. The following shows you how to remove and reposition the shelves to your preferred position We recommend you then condition the oven.

1 REMOVE ALL CABLE TIES & PACKAGING	2 REMOVE SHELVES FROM THE OVEN
HOLDING THE SHELVING IN PLACE

	Rotisserie indicator	Timer indicator
	(see ‘Using the
	Rotisserie’) in the	(see ‘Using the
	User guide	timer’)
Control lock indicator (see	if lit:	if lit:
‘Locking the control panel’)	Rotisserie is	Timer is	Display
if lit:	in use	counting down
Control panel is locked

Cooking time indicator (see ‘Automatic cooking’) in User guide

if lit:

Automatic cooking time is set

Meat probe indicator

(see ‘Using the meat probe’) in User guide

1Remove all the shelving, taking special care with the telescopic sliding shelves.

2To remove a telescopic sliding shelf, grip it at the front (making sure you are gripping the wire shelf and the sliding frame together), lift upwards and pull it out of the oven.

For your safety, the wire shelf and telescopic sliding frame are built together as one unit and are not separable.

Locking the control panel

To lock, press and hold the select button for 2 seconds.

To unlock, press and hold the cancel button for 2 seconds.

Door lock indicator

if lit:

Door is open when Self Clean function selected. See ‘Using the Self Clean function’ in User guide.

ScrollSelect

	if lit:
	Meat probe is in use
	(display will alternate between probe set
	temperature and internal temperature
	of the meat)
	Stop time indicator
Cancel
	(see ‘Automatic cooking’) in User guide
	if lit:
	Automatic stop time is set

continued over