32
Care and cleaning
Burner parts and pan supports
You can remove and clean these parts with hot soapy water or
After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.
Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners are not in place.
Replacing the burners
Check that:
The ignitor is always clean to ensure
The probe is always clean to ensure correct operation of the safety valves.
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits.
Cap
Flame 
spreader
Probe
Ignitor
| Figure 33 Replacing the auxiliary, |
Figure 32 Auxiliary, rapid and | rapid and |
