Selecting a programme and operating your machine
Changing the selections after the programme has started
■■Turning the programme knob while the programme is in operation will not change the programme.
■■The programme needs to be paused or cancelled before changes can be made.
15
Door lock
■■The loading door cannot be opened whilst the READY lamp is flashing due to safety reasons.
■■Once the READY lamp lights continuously the door is able to be opened.
Adding additional laundry
Press the START/PAUSE button to pause the programme.
■■If the water level does not exceed the preset limits, in 1 to 2 minutes the door lock will be deactivated. Laundry may be added / taken out by opening the door.
■■If, after 2 minutes, the door is unable to be opened, it means that the water level inside the machine is too high for the door to be opened and laundry added (refer to ‘Cancelling the programme’).
Pausing the programme
■■Press START/PAUSE button momentarily to switch your machine to the standby mode.
■■Additional functions can be cancelled or selected according to the stage of cycle the current programme is at.
Cancelling the programme
If the programme has started and you want to cancel it:
1Press and hold the START/PAUSE button for 3 seconds.
2The programme will progress to the SPIN step.
3The water will be drained, and after 1
Note: the READY warning lamp flashes during cancelling and then END will appear on the display.
