30

When you have finished the cycle

Turn off the taps to prevent the chance of flooding should a
hose burst.
Unplug the machine from the wall socket.

Cleaning your AquaSmart™

Before you start cleaning your AquaSmart™ washer, ensure that
it is turned off at the wall or that the Key Lock mode has been
activated (refer to page 28).
Cleaning the soft touch buttons, screen and topdeck
Use a soft damp cloth to wipe all surfaces, and wipe dry. Avoid
using chemical or scouring cleaners, as these will damage the
paint and plastic surfaces of your washer.
You can also remove the lid for cleaning. Open the lid fully,
grasp the lid on both sides. Lift in an upward motion, as shown.
To replace the lid, hold the lid vertically and align both hinges
before pushing downwards and slotting back into place.
Cleaning the detergent and fabric softener dispensers
Wipe out the detergent dispenser with a damp cloth.
The funnel of the fabric softener dispenser (the top) clicks off
easily. Simply place a finger down the centre and lift. The fabric
softener well is not removable and needs to be wiped clean
periodically. If the siphon tube looks partially blocked use a
cotton bud to clean.
Cleaning the inside of your washer
It is important that you occasionally clean the inside of your
machine. Your AquaSmart™ has a bowl clean cycle specifically
for this purpose. We recommend that you use the CLEAN ME
cycle 5 – 6 times a year and suggest that you do not wash
clothes during this cycle. Your AquaSmart™ will remind you to
do this after every 100 cycles.
1
Add approximately 2 scoops of a powdered detergent that contain phosphate directly into the
detergent dispenser.
2
Turn your machine on and scroll to LIFESTYLE cycles.
3
Scroll to the CLEAN UP screen.
4
Select CLEAN ME.
Caring for your AquaSmart™ washer
Fig.13 Removing the lid
Fig.14 Removing the
fabric softener funnel