40 Solving operating problems
Wash CYCLE TIME longer than usual.
If water pressure is low, cycle time will increase due to longer fill times. Ensure that inlet hose
filters are not blocked.
Your machine may have initiated Wash Recovery Mode where it has sensed your load is
washing unevenly. Ensure your machine is loaded evenly. Wash very heavy or very large items
separately.
ADDING WATER in the middle of the wash/increased wash volume.
Your machine may have initiated Wash Recovery Mode where it has sensed your load is
washing unevenly. Ensure your machine is loaded evenly. Wash very heavy or very large
items separately.
Small amount of WATER IN BOWL AT END OF CYCLE.
It is normal for a small amount of water to discharge from the fill nozzle af ter a wash.
Liquid remaining in FABRIC SOFTENER DISPENSER at end of cycle.
A small amount of water remaining in the dispenser at the end of the c ycle is normal.
Try cleaning your fabric softener dispenser to remove any blockages.
If the dispenser is at MAX level at the completion of the cycle, check for and remove any
blockages.
If problems persist, contact your Fisher & Paykel dealer or service agent.