USING THE AUDIO / VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENTSwitch off TV and external equipment before connecting cables.
1.Connect VCR or other equipment’s Audio Out (R/L) to the TV Audio Input (R/L) ❶.
For Mono VCR (Single Audio Jack) only connect VCR Audio (L) Out to TV Audio (L) In.
2. Connect VCR or other equipment’s Video Out to the TV Video In ❷.
3.Press POWER to turn on the TV. See ❸. Turn on external equipment also.
4.Press the VIDEO MODE key ❹ to select program source: TV signal or signal
from the equipment you have connected to the A/V jacks. See ❹ and page 6 for remote control operation.
Back View of VCR |
|
|
|
| Remote Control |
| |||
| A/V JACKS |
|
|
|
| ||||
RF | IN |
|
|
|
| VIDEO |
|
|
|
R- AUDIO | VIDEO |
|
|
|
|
|
| ||
CHANNEL |
|
|
|
|
|
| |||
|
|
|
|
| MODE POWER RESET |
| |||
CH3 CH4 | OUT |
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
| R- | VIDEO | TV A/V Input |
|
|
|
| ||
|
|
| 1 | 2 | 3 |
| |||
|
|
| Rear Jacks | ❸ | |||||
|
| UHF/VHF/CATV |
|
|
| 4 | 5 | 6 | |
| ❶ | 75Ω | AUDIO VIDEO INPUT | AUDIO |
|
| ❹ | ||
|
| OUTPUT |
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
| L |
|
|
|
|
|
|
| R AUDIO L | VIDEO | R |
|
|
|
|
|
|
| (MONO) |
|
|
|
|
| |
❷
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS1.Connect the TV Audio Out (R/L) ❶ to the Stereo Amplifier In (R/L) ❷.
2.Press POWER on remote control (see ❸ above) to turn on the TV. Turn on external equipment also.
UHF/VHF/CATV |
|
| ❶ |
75Ω |
|
| |
Back of | AUDIO VIDEO INPUT | AUDIO |
|
TV |
| OUTPUT |
|
|
|
| |
|
| L | ❷ |
| R AUDIO L VIDEO |
| |
| (MONO) | R |
|
|
|
|
Stereo Amplifier
QuickTips
■Make sure all cable connectors are fully seated on jacks.
■Always match cables according to the colors; RED for right audio, WHITE for left audio and YELLOW for video.
■A solid Blue screen with the words Video displayed means that the Video mode is selected, but no signal is being detected at the Video jack.
■Position your TV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality. However, all Fisher STV model speakers are stray field com- pensated and may be placed next to TV sets without any special precautions.
■DO NOT connect external speakers directly to the TV.
9