Fisher PC-27F20 USING THE AUDIO/ VIDEO INPUT JACKS

QuickTips

■Make sure all cable connectors are fully seated on jacks.

■Always match cables according to the

colors;	RED	for right
audio,	WHITE	for left
audio and	YELLOW for
video.

■A/V1 and A/V2 jacks have identical func- tions. Any compatible video equipment can be connected to either set of jacks.

■A solid Blue screen with the word Video1 or Video2 displayed means that the Video mode is selected, but no signal is being detected at the Video jack. Check connection, and turn on external equipment.

■You may be able to use the remote control to operate your VCR, DVD, Cable Box, Satellite Receiver, and TV.

(See pages 7~9.)

USING THE AUDIO/ VIDEO INPUT JACKS

CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

1.Connect VCR, DVD, DSS, or other equipment’s Audio Video Out to the TV Audio

Video Input ❶.

For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.

Follow the same procedure to connect other compatible video equipment to the second set of A/V jacks.

Optional

Connect VCR, DVD, or other equipment’s S-Video Out to the TV S-Video In (AV1)
Jack or S-Video In (AV2) Jack				➁.
Note: Using the S-Video In (AV1) jack overrides the Video 1 jack, and using the S-Video
In (AV2) jack overrides the Video 2 Input jack.
2.Press POWER ❷ to turn on the TV. Turn on external equipment also.
3. Press the	INPUT key ❸ to select program source: TV signal or signal from the
equipment you have connected to the A/V1 or A/V2 jacks.
Back View of a VCR						TV A/V Input Rear Jacks
	A/V JACKS								UHF/VHF/CATV
IN					AUDIO		AUDIO VIDEO INPUT		75Ω
		L-AUDIO-R
VIDEO					OUTPUT		AV2	AV1	S-VIDEO
OUT								VIDEO
		L-AUDIO-R							INPUT
VIDEO
			➊		L			(MON0)	AV1
							L	L
							(MON0)	AUDIO
					R		R	R	AV2
	Remote Control								➁
	VCR	TV	CABLE	OUTPUT			S-VIDEO OUT
❸	DVD	SAT AUX
	INPUT	POWER	RESET		L	R
❷				VIDEO OUT	AUDIO OUT
					DVD Player

14