COMPUTER MODE

17.Another dialog box "PC ADJUSTMENT DISPLAY 2" will appear and the parameter data for the Mode you have selected is shown in this dialog box.

18.Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).

19.To increase the level, point the arrow to ▲ and then press the SELECT BUTTON. To decrease the level, point the arrow to ▼ and then press the SELECT BUTTON.

20.If you want to store the settings in the memory, move the arrow to Stored and press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT BUTTON.

21.To recall the parameter data before setting, move the arrow to Reset and then press the SELECT BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT BUTTON. You can adjust the settings again if needed.

22.To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.

23.If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.

24.The stored settings are memorized even if the MAIN ON/OFF is switched off.

MAIN MENU DISPLAY

NOTE: The "Display area", "Horiz. scale" and " Vert. scale" cannot be adjusted when "HDTV1035i" or "HDTV1080i" is selected on the COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).

1

630

1056

47

4

1.To adjust the display area, move the

arrow by pressing the POINT UP/DOWN BUTTON(s) to select ( ) and press the SELECT BUTTON.

2.Another dialog box "DISPLAY AREA DISPLAY" will appear.

3.Move the arrow to an item that you want to select display area by pressing the POINT UP/DOWN BUTTON(s) and press the SELECT BUTTON. Selected mode data will be displayed in H, V box.

4.To close dialog, move the arrow to "Quit" and press the SELECT BUTTON.

640 X 480

720 X 400

800 X 600

1024 X 768

1152 X 864

1280 X 1024

300

0

PC ADJUSTMENT

DISPLAY 2

 

ITEM

FUNCTION

 

 

CLAMP

Adjustment of the clamp level. When the image has a dark bar, try this adjustment.

 

 

FINE SYNC

Adjust the picture as necessary to eliminate flicker from the display.

 

 

 

 

 

 

DISPLAY AREA

Adjustment the display area to match your PC.

 

 

 

 

 

 

HORIZ. SCALE

Expanding or compressing level for the horizontal direction.

 

 

VERT. SCALE

Expanding or compressing level for the vertical direction.

 

 

 

 

 

43