BASIC OPERATION

 

ADJUSTING SCREEN

 

 

 

 

 

 

 

 

 

ZOOM ADJUSTMENT

 

 

 

1

Press ZOOM button on Top Control or ZOOM /button on

 

 

 

 

 

 

 

 

Remote Control Unit. Message “Zoom” is displayed.

 

 

 

 

2

Press ZOOM button or POINT UP button to make image

 

 

 

 

larger, and press ZOOM button or POINT DOWN button to

 

Zoom

 

 

 

make image smaller.

 

 

 

 

 

 

 

 

 

 

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1

Press FOCUS button on Top Control or FOCUS /button on

Remote Control Unit. Message “Focus” is displayed.

2

Adjust focus of image by pressing FOCUS /button or

POINT UP/DOWN button(s) .

NOTE;

Focus adjustment may not function properly if the image is corrected by KEYSTONE adjustment.

Focus

Message disappears after 4 seconds.

 

LENS SHIFT ADJUSTMENT

1

Press LENS SHIFT button on Top Control or LENS SHIFT /

button on Remote Control Unit. Message “Lens shift” is

 

displayed.

2

 

Press POINT UP button or LENS SHIFT button to move

 

image up, press POINT DOWN or LENS SHIFT button to

 

move image down.

Lens shift

 

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1

Press KEYSTONE button on Remote Control Unit or select

 

Keystone on SETTING menu. (Refer to page 35.) Keystone

 

 

dialog box appears.

 

2

Correct keystone distortion by pressing POINT

 

UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to

• Arrows are white in no correction.

 

reduce the upper part of the image, and press POINT DOWN

 

• Arrow(s) of direction being corrected turn(s) red.

 

button to reduce the lower part. Press POINT LEFT button to

• Arrow(s) disappear(s) at the maximum

 

reduce the left part, and press POINT RIGHT button to reduce

correction.

 

the right part.

 

Reduce the upper width

Reduce the lower width

Reduce the left part with

with POINT UP button.

with POINT DOWN button.

POINT LEFT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reduce the right part with POINT RIGHT button.

20