COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

 

MENU OPERATION

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to select Input and press SELECT

 

button. Another dialog box INPUT SELECT Menu will appear.

2

Press POINT DOWN button and a red-arrow icon will appear.

Move arrow to INPUT source that you want to select, and then

press SELECT button.

INPUT button

Input 1

Input 2

Input 3

INPUT Menu icon

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to Input

1 and then press SELECT button. Source Select Menu will

 

appear.

3

Move a pointer to either Digital or Analog and then press

SELECT button.

 

When your computer is connected to COMPUTER

Digital

 

 

INPUT (DIGITAL) terminal, select RGB (Digital).

 

 

 

When your computer is connected to COMPUTER INPUT

Analog

 

 

(ANALOG) terminal, select RGB (Analog).

 

 

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 1 and press SELECT button.

Input 1

Source Select Menu

Move a pointer to Digital or Analog and press SELECT button.

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connect a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks.

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to Input

2 and then press SELECT button. Source Select Menu will

 

appear.

3

Press POINT DOWN button and a red-arrow icon will appear.

Move arrow to "RGB", and then press SELECT button.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

Input 2

Source Select Menu

Move a pointer to RGB and press SELECT button.

22