CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly.

COMPUTER AUDIOINPUT 1/AUDIO MONITOR

COMPUTER INPUT/MONITOR

COMPUTER INPUT

COMPUTER AUDIO

OUTPUT TERMINAL (ANALOG)

TERMINAL (DIGITAL)

INPUT 2 JACK

OUTPUT JACK

This terminal is switchable and can be used as computer audio input 1 or audio monitor output (variable).

Set the terminal up as either Computer audio input 1 or Audio Monitor output properly before using this terminal.

Refer to P13, P23.)

This terminal is switchable and can be used as computer input or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal.

Refer to P13, P23.)

Note; This terminal outputs from 5 BNC type computer input on INPUT 2 jacks only.

Connect computer output

Connect an audio output

(Digital DVI-D type) to this

(stereo) from computer to

terminal.

this jack.

HD (HDCP Compatible) signal

(Refer to P13.)

can also be connected.

 

Refer to P13.)

 

R/C JACK

 

When using Wired/Wireless

 

Remote Control Unit as Wired

 

Remote Control, Connect

 

Wired Remote Control Unit to

INPUT 1

this jack with Remote Control

IN/OUT DIGITAL(DVI-D)

Cable (supplied).

R/C JACK

USB CONNECTOR (Series B)

When controlling computer with Remote Control Unit of this projector, connect USB terminal of your personal computer to this terminal. (Refer to P13.)

RESET BUTTON

This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.

AUDIO 1

USB

RESET

CONTROL PORT

IN/OUT

 

 

AUDIO 2

 

G

B

 

R

H/V

V

 

Cb/Pb

 

Cr/Pr

 

 

 

 

 

INPUT 2

 

 

VIDEO/Y Cb/Pb Cr/Pr

R–AUDIO–L

S–VIDEO

 

 

 

 

 

(MONO)

 

 

 

 

INPUT 3

 

 

CONTROL PORT CONNECTOR

When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.)

✽Do not press this button. This button is used for our optional accessories.

5 BNC INPUT JACKS

Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks. (Refer to P13 and 14.)

VIDEO INPUT JACKS

 

AUDIO INPUT JACKS

 

S-VIDEO INPUT JACK

Connect composite video

Connect an audio output

 

Connect S-VIDEO

output from video equipment

from video equipment to

 

output from video

to VIDEO/Y jack or connect

these jacks.

 

equipment to this

component video outputs to

(Refer to P14.)

 

jack. (Refer to P14.)

VIDEO/Y, Cb/Pb and Cr/Pr

 

 

 

jacks. (Refer to P14.)

 

 

 

12