COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

INPUT button

Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

NOTE

●Input 1 terminal is switchable and can be used as computer input or monitor output.

✽

Input 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input 2

 

 

 

 

 

 

 

 

 

 

 

 

 

Input 3

 

 

 

 

 

✽Input 1 is not displayed when the Input 1 is used as Monitor out.

 

MENU OPERATION

 

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to

 

INPUT Menu icon.

 

 

INPUT Menu icon

2

Press POINT UP/DOWN button and a red-arrow icon will

appear. Move arrow to INPUT source that you want to select,

and then press SELECT button.

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT UP/DOWN button to move a red arrow pointer to

Input 1 and then press SELECT button. Source Select Menu will

 

appear.

3

Move a pointer to source that you want to select and then press

SELECT button.

RGB(Analog)

When your computer is connected to INPUT 1 (ANALOG) terminal, select RGB(Analog).

RGB(Scart)

When video equipment is connected to INPUT 1 (ANALOG) terminal, select RGB(Scart).

RGB(PC Digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB(PC Digital).

RGB(AV HDCP)

If a HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB(AV HDCP).

Monitor out

If the INPUT 1 ANALOG terminal is being used as a MONITOR OUT terminal, select Monitor out.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 1 and press SELECT button.

Input 1

Source Select Menu

Move a pointer to source and press SELECT button.

NOTE;

HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied.

The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

23