Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1

Press the MENU button

to display the On-Screen

 

Menu. Press the Point 7

8 buttons to move the red

 

frame pointer to the PC Adjust Menu icon.

2

Press the Point ed buttons to move the red frame

 

pointer to the item that you want to adjust and then

press the SELECT button to display the adjustment dialog box. Press the Point 7 8 buttons to adjust the value.

Fine sync

Use the Point 78 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point 78 buttons to adjust the number of total dots in one horizontal period to match your PC image.

Horizontal

Use the Point 78 buttons to adjust the horizontal picture position.

Vertical

Use the Point 78 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Use the Point 78 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

PC Adjust Menu icon

PC Adjust Menu

Move the red frame pointer to an item and press the SELECT button.

Status (Stored / Free) of the selected Mode.

Selected Mode

Press the Point 7 8buttons to adjust the value.

Press the SELECT button at this item to adjust other items.

Press the SELECT button at the Current mode item to show the information of the connected computer.

29