Maintenance and Cleaning
Cleaning the Filter

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter immediately. Clean the filter by following the steps below.

1

Turn off the projector, and unplug the AC power cord

 

from the AC outlet.

2

Turn the projector over and remove the filter by pulling

 

the latches upward.

3

Gently clean the filter by using a brush or rinse it

 

softly.

4

When rinsing the filter, dry it well. Replace the filter

properly. Make sure that the filter is fully inserted to the projector.

CAUTION

Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading picture quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Filter

Pull up and remove.

✔Note:

•When reinserting this filter, be sure that the slit part is facing the outer side.

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the filter.

1

Press the MENU button to display the On-Screen

Filter counter

 

Menu. Use the Point 78 buttons to move the red

 

 

frame pointer to the Setting Menu icon.

 

2

Use the Point ed buttons to move the red frame

 

 

pointer to Filter counter and then press the SELECT

 

 

button. A dialog box appears showing the total

 

 

accumulated time of the filter use, a timer setting

 

 

option, and the reset option. Select Reset and the

 

 

“Filter counter Reset?” appears. Select [Yes] to

 

 

continue.

 

3

Another confirmation dialog box appears, select [Yes]

 

 

to reset the Filter counter.

 

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

52