PREPARATION

POSITIONING PROJECTOR

This projector is designed to project on a flat projection surface.

The projector can be focused from 3.6’(1.1m) ~ 22.6’(6.9m).

Refer to the figure below to adjust a screen size.

H1 : H2 = 26 : 1

ROOM LIGHT

The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.

22.6' (6.9m)

 

 

 

17.4' (5.3m)

 

 

 

260”

 

 

 

 

 

 

 

 

 

 

 

13.1' (4.0m)

 

200”

Max. Zoom

 

 

 

 

 

 

 

 

8.5' (2.6m)

 

 

 

 

216”

 

 

 

 

150”

 

166”

Min. Zoom

H1

 

3.6'

 

 

 

 

 

 

 

 

 

 

 

 

 

(1.1m)

 

100”

 

 

 

 

 

 

 

126”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

43”

 

82”

 

 

 

 

 

 

36”

 

 

 

 

 

 

H2

 

 

 

 

 

 

 

 

Screen Size

36”

43”

100”

150”

 

200”

 

260”

 

 

 

 

 

 

 

 

(W x H) mm

732 x 549

874 x 655

2032 x 1524

3048 x 2286

4064 x 3048

5283 x 3962

 

Zoom (min)

3.6' (1.1m)

4.3' (1.3m)

10.5' (3.2m)

15.7' (4.8m)

21.0' (6.4m)

 

–––––

Zoom (max)

–––––

3.6' (1.1m)

8.5' (2.6m)

13.1' (4.0m)

17.4' (5.3m)

22.6' (6.9m)

ADJUSTABLE FEET

Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6 degrees.

1

Lift the front of the projector and pull the FEET LOCK

 

LATCHES on both sides of the projector.

2

Release the FEET LOCK LATCHES to lock the

 

ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to

 

adjust the position and tilt.

3

To retract the ADJUSTABLE FEET, lift the front of the

 

projector and pull and undo the FEET LOCK LATCHES.

Keystone distortion of the projected image can be adjusted by Menu Operation. (Refer to P20 and 36.)

CAUTION

 

FEET LOCK

ADJUSTABLE FEET

LATCHES

 

 

Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. Refer to page 10.

9