Video Input

Input Source Selection (Video, S-Video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1

Press the MENU button and the On-Screen Menu will

 

appear. Press the Point 7 8 button to move the red frame

 

pointer to the Input Menu icon.

2

Press the Point d button to move the red arrow pointer to

 

Video and then press the SELECT button. The Source Select

 

Menu will appear.

3

Move the pointer to the source that you want to select and

 

then press the SELECT button.

 

 

When selecting Auto, the projector automatically

 

Auto

 

detects incoming video signal, and adjusts itself to

 

 

 

 

optimize its performance. The projector selects

 

 

connection in the following order:

 

 

1st S-Video

 

 

2nd Video

 

 

The S-VIDEO jack has priority over the VIDEO jack

 

 

under the condition of connecting both the S-VIDEO

 

 

jack and the VIDEO jack.

 

 

When video input signal is connected to the VIDEO

 

Video

 

jack, select Video.

 

 

 

 

When video input signal is connected to the S-VIDEO

S-Video

jack, select S-Video.

 

 

✔Note:

When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. (p41)

INPUT button

Video

Computer 1

Computer 2 ✳

VIDEO button

Video

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

 

Move the pointer to

 

 

VIDEO

Video and press the

SELECT button.

 

Source Select Menu (VIDEO)

 

Move the pointer to the

 

source that you want to

 

select and press the

 

SELECT button.

32