Setting
Setting
This projector has Setting menu that allows you to set up the other various functions described as follows;
1 | Press the MENU button to display the |
| Press the Point 78 button to move the red frame pointer to |
| the Setting Menu icon. |
2 | Press the Point d button to move the red frame pointer to |
| the item that you want to set and then press the SELECT |
button. The Setting dialog box appears.
Language
The language used in the
Keystone
This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 button, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point ed button.
Store . . . . stores the keystone adjustment even if the AC power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected.
Blue back
When this function is “On,” the projector produces a blue image while input signal is not detected.
Display
This function decides whether to display
Off . . . . . . . does not show
●
●“Power off?” message
●
●“No signal” message
●”Wait a moment!” message
Logo PIN Code Lock
This function prevents others except specific users from changing the Logo setting.
Off . . . . .the Logo setting can be changed freely from the Logo menu. (p40)
On . . . . . .the Logo setting cannot be changed without the Logo PIN code.
If you want to change the Logo PIN Code Lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set "4321" at the factory.
Setting Menu (Language)
Set the red frame | Setting Menu icon |
pointer to the item |
|
and press the |
|
SELECT button. |
|
When pressing the SELECT button at Language, the Language Menu appears.
Logo PIN Code Lock
Setting
39