Assembling the Barn
Activity Toy Straps
Plastic Tab
Activity Toys
Fastener
Straps
| Slots | |
Sleeve | Activity | |
Plastic Tab | ||
Toys | ||
| ||
Fastener Straps |
| |
Tube | Support |
•Slide the tubes through the sleeves in each side of the play quilt.
•Position the supports so that the sides with the slots face inward.
•Fit the two small fastener straps on each end of the tubes through the slots inside the circular openings in the supports. Fasten the fastener straps together to secure the tubes to the supports.
•Fit the plastic tabs at the corners of the play quilt into the slots in the supports.
•Fasten the activity toys to the activity toy straps.
Battery Replacement
CAUTION
This product contains small parts.
Batteries must be replaced by an adult.
Battery Compartment | Battery Compartment Door |
2 x LR44 or Equivalent
Shown Actual Size
•Locate the battery compartment door on the back of the chicken activity toy.
•Loosen the screw in the battery compartment door with a Phillips screwdriver. (The screw will remain in the door.)
•Lift the battery compartment door to open.
•Remove the used batteries and dispose of them properly.
•Insert two new
Carry-Along
Fastener Strap
Helpful Hint: We recommend using alkaline batteries for longer battery life.
•Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not
•When lights or sounds from this toy become faint or stop working, it’s time to replace the batteries!
•Place the play quilt print side up on a flat surface.
•Attach the activity toys to the straps on the sides of the play quilt and place the toys on top of the quilt.
•Locate the fastener strap at one end of the play quilt. Place the supports and tubes at the opposite end of the play quilt and roll the play quilt from end to end.
•Fit the fastener strap through the loop on the outside of the play quilt and fasten to close.
Battery Tips
•Do not mix old and new batteries.
•Do not mix different types of batteries: alkaline, standard
•Remove the batteries during long periods of
•Never short circuit the battery terminals.
•
•Only batteries of the same or equivalent type as recom- mended in the "Battery Replacement" instructions are to
3 be used.