Fisher-Price 72408 Replacement Instructions, Remove Old Net Ring, Assemble New Net Ring

Replacement Instructions

IMPORTANT! Carefully follow these instructions to replace the net - ring assembly.

1	Old	2	Loop
			New Ring
	Net - Ring

Ring Tab

Rim

Remove Old Net - Ring

•Find the four screws in the underside of the rim. Using a Phillips screwdriver, remove the four screws in the rim. Throw away these screws.

•Remove the old net - ring from the topside of the rim. Throw away the old net - ring.

Assemble New Net - Ring

•Pull each net loop through a ring tab, as shown.

•Grasp the bottom of the net and pull down to be sure all of the loops are inserted into all of the ring tabs.

3	New
	Net - Ring

Rim

Front View

New Net - Ring

Holes

Holes

Rim

Top View

4

Rim

•Align the four holes in the ring with the four holes in the rim.

•Fit the new net - ring assembly into the topside of the rim.

•Insert four, new screws through the underside of the rim and into the ring.

•Tighten the screws with a Phillips screwdriver. Do not over-tighten.

Replacement is now complete.

If you have further questions regarding the installation of the net - ring, please call

Fisher-Price®Consumer Relations, toll-free at 1-800-366-1455, 8 AM-6 PM EST Monday through Friday.

Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to:

Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.

Printed in U.S.A.	Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.	72408pr-0921
	©2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.