•Place a cap nut on a scrap block of wood.
•Place one end of the straight axle into the cap nut.
•Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
•Slide a hubcap (peg side up) onto the straight axle.
•Slide a rear wheel (indented side down) onto the
straight axle.
•Slide a washer onto the straight axle.
Cap Nut
Straight Axle
Rear Wheel Indented
Side Down
Straight Axle
Washer
3
•Turn the frame upside down.
•Insert the straight axle through the holes in the rear of
the frame.
Hole Hole
Frame
Straight Axle
Assembly
Hubcap Peg
Side Up
13
2
Bottom View
Scrap Block
of Wood
•Turn the frame on its side with the exposed end of
the straight axle up.
•Place the assembled rear wheel on the scrap block
of wood.
•Slide a washer onto the straight axle.
•Slide a rear wheel (indented side up) onto the end of
the straight axle.
•Slide a hubcap (peg side down) onto the straight axle.
•Fit a cap nut on the end of the straight axle.
•Tap the cap nut with a hammer. Gently pull the rear
wheel up to be sure the cap nut is securely
attached to the straight axle.
•Set the frame assembly aside.
Cap Nut
Rear Wheel
Indented Side Up
Assembled Rear
Wheel
Straight Axle
Washer
Hubcap Peg
Side Down
Frame
4
Bottom View
Scrap Block
of Wood
72639c-0920 9/28/01 1:41 PM Page 3