| Decoration |
1
Seat
Coaster
•Insert the four tabs on the seat into the four slots in the coaster.
•Press down on the seat until it “snaps” into place. Pull up on the seat to be sure it is secure.
•Make sure the areas where the labels will be applied are clean and dry.
•Apply the labels as shown in the illustration.
•For best adhesion, try to avoid applying a label more than once.
2 | Care | |
• To clean, wipe the surface of this | ||
| ||
Peg | toy with a damp cloth. Do not | |
immerse this toy. | ||
| ||
Tabs | • Check plastic parts on a regular | |
Slots | basis and discard if broken or | |
cracked. | ||
|
•While sitting in a chair, place your foot onto the seat.
•Hold the handle with two hands and position it so that the tabs face the seat.
•Align the pegs on either side of the handle with the slots in the front of the coaster.
Hint: One of the pegs and one of the slots are larger than the other.
•Press firmly downward on the handle until it snaps into place. Pull upon the handle to be sure it is secure.
Consumer Information
If you have any questions, please call
For other countries, outside the United States:
Canada: call
Great Britain: telephone 01628 500303.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand:
| |
©2002 Mattel, Inc. All Rights Reserved. | Printed in Mexico |
® and ™ designate U.S. trademarks of Mattel, Inc. |