www.evofitness.com 19
ASSEMBLY
STEP 2: Assemble Upright Frame |
|
|
| ||
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or |
|
| |||
pinch (Hand tighten bolts until last step) |
|
|
| ||
A) Raise the Left and right uprights (301 x 2) |
| 811 | X2 | ||
B) | Secure the left upright (301) with two 8x18mm Allen bolts (810) | and | |||
|
| ||||
| two # 8 washers through the front side of the base frame. Hand tighten. | 810 | X4 | ||
C) | Secure the right upright (301) with two 8x18mm Allen bolts (810) and | ||||
| two # 8 washers through the front side of the base frame. Hand tighten. |
|
| ||
D) | Insert one M8x52mm Allen bolt (811) and one #8 washer through the | 812 | X6 | ||
| side of the base frame and the left upright. Hand tighten. |
|
|
| |
E)Insert one M8x52mm Allen bolt (811) and one #8 washer through the side of the base frame and the right upright. Hand tighten.
Tighten all Allen bolts with Allen wrench C (provided with hardware)
