www.evofitness.com 23

ASSEMBLY

STEP 4:

Rotate the console up till it stop as drawing shown. Tighten the screw (807) of the console connect tube (213) for both side to keep the console from moving during the assembly

Mount the Handle Bar Cover - LR (208) underneath the console and attach it with Upright - Left (301) , secure by two M4×15mm screw (802), one 3x 10 mm (803) screw. Fit the top of Handle Bar Cover-LR(208) with the console and secure with two M4x15mm screw (802) underneath the console and two same screw (802) from the outside as drawing shown . Then mount the Handle Bar Cover - LL (207) to Upright - Left (301) and secure with four M4×15mm screw (802). Repeat the same procedure for the right hand side as the drawing shown.

802X20

803X2

Page 23
Image 23
Smooth Fitness FX25 user manual 802 803