Assembly
Rear Wheel | Assembly Tool |
Spoke Side Up | Cap Nut |
| |
Straight Axle |
|
3 | Assembled |
|
Rear Wheel | Scrap Block |
of Wood
•Turn the frame on its side with the exposed end of the straight axle up.
•Place the assembled rear wheel on the scrap block of wood.
•Slide the other rear wheel (spoke side up) onto the end of the straight axle.
•Place a cap nut on the end of the straight axle.
•Place the assembly tool over the cap nut and tap it with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle.
Wheel Cap
4
•Fit the wheel cap into the center of the wheel. Tap the wheel cap with a hammer to secure it to the wheel.
•Set the frame assembly aside.
|
| Pedal Axle |
|
| Cover |
|
| Pedal Axle |
5 |
| Slot |
Metal Tab | Pedal Axle | |
| Cover | |
|
|
•Fit two pedal axle covers onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover.
•While holding the pedal axle covers on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
•Push the pedal axle covers into the center of the front wheel until they are flush with the surface of the front wheel.
•Repeat this procedure with the other two pedal axle covers on the other side of the front wheel assembly.
5
