Adjusting Your Car’s
Wheel Alignment
If in Mode II your car is not driving in a straight path
on smooth surfaces, follow these instructions.
1 | Car Pulls |
| to the Right |
Screw Hole
•Turn the car over and locate the small screw hole near
front wheel on the driver’s side.
2
Car Pulls 
to the Left
Counter-
Clockwise
If your car is pulling to the left:
•Insert the small jeweler’s or eye- glass screwdriver into the screw and turn one or two complete turns
Clockwise
If your car is pulling to the right:
•Insert the small jeweler’s or eye- glass screwdriver into the screw and turn one or two complete turns clockwise.
3 |
Place the car on a smooth surface and test the align- ment by driving the car in mode II in a straight line (with the steering wheel centered). If the car drives straight you are finished.
If the car still pulls to one direction repeat step 2.
20
