15
Fit the lens tabs on the back of a lens assembly into the
headlight slots in the grille.
Press firmly to snap the lens assembly into the grille.
Repeat this procedure to snap the other lens assembly
into the grille.
Grille
Tab
Slot
14
Brush Guard
Bumper
Fit and hold the brush guard against the front bumper.
Insert two #10 x 1" screws through the front of the brush
guard and into the bumper.
Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Fit a spacer tube between the grille and the
back of the brush guard, as shown.
Insert a #8 x 4" screw through the brush
guard and spacer tube and into the hole in
the grille.
Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Repeat this procedure to assemble the other
spacer tube on the other side of the grille.
Spacer Tube
16
Assembly
15
Insert a hood latch into one of the holes in the vehicle
body, near the hood area.
Twist the base of the hood latch 1/4turn to secure it in the
vehicle body.
Repeat this procedure on the other side of the hood area
to attach the other hood latch to the vehicle body.
Hood Latch
Hole
17
Hood
Latch