29
With the seat at an angle, insert the tabs on the front
edge of the seat into the slots in the foot-well wall .
Push down firmly on the edge of the seat above each
tab to snap the tabs into the slots .
Rotate the back of the seat down to snap the seat back
tabs into the slots in the vehicle body. Push down firmly
on the seat back .
11 3
11 2
11 1
Seat
Tabs
Seat Back Tabs
Slot
1
2
11 3
PUSH
HERE
30
31
#8 x 1" Screw
Insert a #8 x 1" screw into the rear of seat as shown.
Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Sport Bar
Canopy
Canopy Sleeves
Canopy
Sleeves
Position the sport bar on its side so that the sport bar
ends curve away from you.
Position the canopy opposite the sport bar with the
netting facing away from you.
Slide the four canopy sleeves onto the sport bar.
Assembly
19
Insert each end of the long seat belt strap through a slot
in the center of the seat. Make sure the fasteners face
the outer edge of the seat.
Pull each side of the long seat belt strap evenly through
the slots. Make sure to pull each T-loop through a slot.
Turn the seat upright.
T-Loop
Fastener
Long Seat Belt Strap
28