Problems and Solutions
Problem | Probable Cause |
| Solution |
|
|
| |
Motor is not running; | Mode switch is in OFF | position | Slide the mode switch to | swing and mobile or | swing only. | ||
no swinging | or | mobile only position |
|
|
|
| |
| Batteries incorrectly installed | Remove the batteries and replace in correct orientation, as | |||||
|
|
|
| indicated inside the battery compartment. |
|
| |
| Dead batteries |
| Replace all four batteries with four, fresh “D” alkaline batteries. | ||||
Motor is running but | Need to start swinging motion | To start swinging motion, give the seat a light push. |
| ||||
swinging stops after a |
|
|
|
|
|
|
|
few minutes | Swing motion setting is |
| Adjust the speed dial to a higher speed setting and give the | ||||
| inappropriate for child’s weight | seat a light push. |
|
|
| ||
| Weak batteries |
| Replace all four batteries with four, fresh “D” alkaline batteries. | ||||
No difference noticed in | Swing did not have sufficient time | Allow the swing time to adjust to new setting. |
| ||||
swinging motion after | to adjust to different setting |
|
|
|
| ||
speed dial is adjusted |
|
|
|
|
|
|
|
| Weak batteries |
| Replace all four batteries with four, fresh “D” alkaline batteries. | ||||
Mobile does not work | Mode switch is in OFF | position or | Slide mode switch to desired setting | . |
| ||
|
| swing only position |
|
|
|
|
|
| Mobile turns off automatically | Press the reset button | to restart mobile for another |
| |||
| after seven minutes |
| seven minutes. |
|
|
|
Care
•Remove the tray from the seat.
•Unbuckle the restraint system.
•Remove the pad elastic loops from the pegs and unfasten the pad fasteners from the seat.
•Remove the pad from the restraint system.
•Remove the toys from the mobile.
•Machine wash the pad and toys in cold water with a mild detergent. Do not use bleach. Tumble dry on low heat and remove promptly.
•To clean the seat, restraint system, tray, mobile and motorized frame, use a mild cleaning agent and damp cloth. Rinse with clean water to remove residue.
•Replace the pad onto the seat.
•Replace the toys on the mobile.
•Periodically check the swing for loose fasteners or broken parts and tighten as needed.
Printed in China | |
©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. |