Before you begin, take note!
IMPORTANT! You must calibrate the stylus to the screen before
•Install four “AA” alkaline batteries. Turn Pixter® power on. Wait until you see the Home Screen.
•Turn Pixter over and locate the calibration hole.
•Insert, push and hold the stylus in the calibration hole. Turn Pixter over so that you can see the screen. When you see two plus signs 
remove the stylus from the calibration hole.
•First touch the upper left corner 
with the tip of the stylus.
•Then, touch the lower right corner 
with the tip of the stylus.
5
