Assembly
| Ramp |
| Ferris Wheel Assembly |
7 | #8 x 1/2" Screw |
|
•Position the Ferris wheel assembly so that the back is facing you.
•Fit one of the ramps on the back of the Ferris wheel assembly as shown.
•Insert four #8 x 1/2" screws through the ramp and into the Ferris wheel assembly. Tighten the screws.
•Repeat this procedure to attach the other ramp to the Ferris wheel.
| Ferris Wheel |
Ramp |
|
Hub |
|
Track | Base Door |
8 |
|
#8 x 2" Shoulder Screw |
Ferris Wheel |
Hub |
9 |
•Rotate the Ferris wheel down toward the base. The arch should “click” in place.
•Insert a #8 x 2" shoulder screw into the hub on the end of one ramp. Tighten the screw.
•Insert the other #8 x 2" shoulder screw into the opposite hub. Tighten the screw.
•Position the base assembly so that the base door is facing you.
•Position Ferris wheel assembly so that the decorated side is facing you.
•Fit the hub on the end of one ramp onto the track as shown.
•Bend the track slightly and fit the other hub to the opposite side of
the track. | 5 |
|
