Assembly
M4 Lock Nut
Rounded Side
| Bracket |
Shown Actual Size | Grooves |
|
Lock Nut | Tall |
End | |
| Seat |
| Tubes |
| Bottom |
| Edge of |
Hexagonal | Seat |
| |
Opening |
|
9
•Position the bracket so that the tall end is toward the bottom edge of the seat.
Hint: The M4 lock nuts have been assembled to the bracket at the factory. During shipment of this product, they may have fallen out. Check to be sure there is a lock nut in each hexagonal opening on the bracket. If one (or more) has fallen out, fit the lock nut into a hexagonal opening in the bracket. Make sure the rounded side of the lock nut is facing up.
• Fit the grooves on the bracket to the seat tubes, as shown.
Seat
Tubes
11
• Rotate the seat tubes down.
Seat Tubes
Bracket
Seat Wire
Bracket
Slot
10 |
M4 Screw - 4
Shown Actual Size
• Insert four M4 screws into the seat tubes and tighten.
12
• Fit the seat wire through the slot in the bracket as shown.
6
