| Assembly |
|
|
| Battery | Inst | a | l | latio | n |
|
|
|
|
Elastic
Loop
Elastic
Loop
Hint: When swinging, sound or power L.E.D. slows/dims/stops, it’s time to replace the batteries! We recommend using alkaline batteries for longer battery life.
Battery |
Compartment |
Door |
21
•Fit the bottom edge of the pad around the bottom edge of the seat.
•Hook the elastic loops on each side of the pad to the peg on the back of the accessory bins.
Installation
•Locate the battery compartment door on the swing frame.
•Insert a coin into the battery compartment door and pry the battery compartment door off of the swing frame.
•Insert four “D” (LR20) alkaline batteries.
•Replace the battery compartment door.
Hub |
#6 x 5/8” Screw - 4
Shown Actual Size
Plug
Toy Bar
(Toys may
be different) | Plug |
Plug |
|
| Socket |
22
• Fit the toy bar plugs into the sockets on the swing tubes.
Hint: If the toy bar plugs do not fit into the sockets, turn the toy bar around. Now, fit the plugs into the sockets.
• Insert two #6 x 5/8" screws into each plug and tighten.
9
1.5V x 4 |
“D” (LR20) |
SHOWN ACTUAL SIZE |
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
The batteries may explode or leak.
•Never
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge
•Remove rechargeable batteries from the product before charging.
•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
