Manuals / Brands / Lawn and Garden / Brush Cutter / Jonsered / Lawn and Garden / Brush Cutter

Jonsered CC2036 Fitting the handlebar, Transport position, handlebar

1 44

Download 44 pages, 1.55 Mb

ASSEMBLY

English – 13

Fitting the handlebar

• Remove the screw at the rear of the throttle handle.

• Slide the throttle handle onto the right side of the

handlebar, (see diagram).

• Align the screw hole in the throttle handle with the hole

in the handlebar.

• Reﬁt the screw in the hole in the rear of the throttle

handle.

• Screw the screw through the handle and handlebar.

Tighten it.

• Remove the mounting components from the

handlebar mounting.

• Position the handlebar as shown. Fit the mounting

components and tighten the knob lightly.

• Fit the wiring as shown.

• Put on the harness and hang the machine from the

support hook. Now make a ﬁnal adjustment so that

the machine is in a comfortable working position when

it hangs from the harness. Tighten the knob.

Transport position, handlebar

• The handlebar can easily be turned to ﬁt along the

shaft for easier transportation and storage.

• Loosen the knob. Turn the handlebar clockwise so that

the throttle handle rests against the engine.

• Now twist the handlebar around the shaft. Tighten the

knob.

• Fit the transport guard to the cutting attachment.

Contents

Main KEY T O SYMBOLS Symbols CONTENTS Contents Note the f ollowing before starting: INTR ODUCTION Dear customer! WHA T IS WHA T? Impor tant Personal protective equipment Mac ottle lockout Thr s safety equipment hine A B Stop s Quic hment guard Cutting attac Mufer Locking nut Cutting equipment Cutting equipment Sharpening grass cutters and grass blades Sharpening the saw blade Trimmer head Fitting the handlebar Transport position, handlebar Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutter J I A Fitting the trimmer guard and trimmer head Trimmy SII F D B C H G BA ML Fitting other guards and cutting attachments Adjusting the harness and clearing saw Quick release Spreading the load on your shoulders BA ML Correct height Correct balance FUEL HANDLING Fuel safety Transport and storage Fuel Gasoline FUEL HANDLING Mixing Fueling STARTING AND STOPPING Check before starting Starting and stopping Cold engine STARTING AND STOPPING Warm engine Starting For throttle handles with a start throttle lock: Stopping General working instructions Basic safety rules The ABC of clearing Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer head Page Carburetor Function Basic setting Fine adjustment Conditions Low speed jet L Fine adjustment of the idle speed T H High speed jet H Correctly adjusted carburetor Mufer Cooling system Bevel gear Air lter Cleaning the air lter Oiling the air lter Spark plug Maintenance schedule TECHNICAL DATA Technical data Page FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURERS WARRANTY COVERAGE OWNERS WARRANTY RESPONSIBILITIES WARRANTY COMMENCEMENT DATE Page !