MAINTENANCE

this screw (4 mm Allen screw) to increase or decrease the start throttle speed.

4 mm

Proceed as follows:

1Run the machine at idle.

2Press the start throttle lock as described under the heading Starting and stopping.

3If the start throttle speed is too low (below 4000 rpm), turn the adjuster screw A clockwise until the cutting attachment starts to rotate. Then turn A clockwise a further 1/2 turn.

Muffler

CAUTION! Some mufflers are fitted with a catalytic converter. See chapter on Technical data to see whether your machine is fitted with a catalytic converter.

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may cause fire if directed against dry and combustible material.

Some mufflers are equipped with a special spark arrestor screen. If your machine has this type of muffler, you should clean the screen at least once a week. This is best done with a wire brush.

On mufflers without a catalytic converter the screen should be cleaned weekly, or replaced if necessary. On mufflers fitted with a catalytic converter the screen should be checked, and if necessary cleaned, monthly. If the screen is damaged it should be replaced. If the screen is frequently blocked, this can be a sign that the performance of the catalytic converter is impaired. Contact your dealer to inspect the muffler. A blocked screen will cause the machine to overheat and result in damage to the cylinder and piston.

CAUTION! Never use a machine with a defective muffler.

WARNING! Mufflers fitted with catalytic

! converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin.

Remember the risk of fire!

Cooling system

To keep the working temperature as low as possible the machine is equipped with a cooling system.

4

3

2 1

The cooling system consists of:

1Air intake on the starter.

2Fins on the flywheel.

3Cooling fins on the cylinder.

4Cylinder cover (directs cold air over the cylinder).

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine overheating which causes damage to the piston and cylinder.

English – 29

Page 28 Page 30
Page 29
Image 29
Jonsered CC2036 manual Muffler, Cooling system, Remember the risk of fire
Page 28 Page 30

CC2036 specifications

The Jonsered CC2036 is a powerful and efficient chainsaw designed for both professional users and homeowners looking to tackle demanding cutting tasks. Equipped with a robust 36cc engine, the CC2036 offers an impressive balance between performance and ease of use. This model is particularly favored for its lightweight design, making it an ideal choice for extended operational periods without causing fatigue.

One of the standout features of the Jonsered CC2036 is its Easy Start technology. This innovative system significantly reduces the effort required to start the engine. With just a few simple pulls, users can get the chainsaw running smoothly, making it accessible for operators of all skill levels. This technology is especially beneficial for those who may struggle with traditional starting methods.

Additionally, the CC2036 incorporates a tool-less chain tensioning system, which allows users to adjust the chain tension quickly and efficiently without the need for additional tools. This feature enhances convenience, ensuring that the chainsaw is always in optimal working condition, which is crucial for safety and performance during cutting tasks.

Another notable characteristic of the Jonsered CC2036 is its low-vibration design. This feature minimizes user fatigue and enhances comfort during prolonged use, making it suitable for tasks that require precision and stamina. The anti-vibration technology reduces the shock transmitted to the user’s hands, allowing for a more controlled and stable cutting experience.

In terms of safety, the CC2036 is equipped with a chain brake that provides instant stopping of the chain in the event of kickback, offering peace of mind to the operator. Furthermore, the chainsaw is designed with an ergonomic handle that provides a secure grip, enhancing control and maneuverability.

Fuel efficiency is another highlight of the Jonsered CC2036. Its advanced engine technology not only delivers powerful performance but also ensures lower emissions, making it an environmentally friendly choice. This blend of efficiency and power ensures that users can operate the chainsaw for extended periods without frequent refueling.

Overall, the Jonsered CC2036 is engineered for reliability and performance, making it a versatile tool for a variety of cutting applications, whether for landscaping, firewood processing, or tree maintenance. With its user-friendly features, safety mechanisms, and powerful engine, the CC2036 stands out as an excellent option for those seeking a dependable chainsaw.
Top Page Image Contents