Calibration Hole
•Turn Pixter® Color power on. Wait until you see the Home Screen.
•Turn Pixter over and locate the calibration hole.
•Insert, push and hold the stylus in the calibration hole. Turn Pixter® Color over so that you can see the screen.
•When you see two 
, remove the stylus from the calibration hole.
•First touch the 
in the upper left corner with the tip of the stylus.
•Then, touch the 
in the lower right corner with the tip of the stylus.
Hint: After calibrating your screen, the contrast resets to the
To change the contrast on the screen, touch the Save It! 
tool.
60
