Manuals / Dell / Computer Equipment / Laptop

Dell W04C owner manual POST Behavior

Models: W04C

1 59

Download 59 pages 18.68 Kb

Page 48

Table 8. POST Behavior

OptionDescription

• Last Power State

Auto On Time

Deep Sleep Control

Fan Control Override

USB Wake Support

Wake on LAN / WLAN

Block Sleep

Intel Smart Connect Technology

Table 8. POST Behavior

This option sets the time of the day when you would like the system to turn on automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The startup time can be changed by typing the values in the time and A.M./P.M. fields.

•Disabled - The system will not automatically power up.

•Every Day - The system will power up every day at the time you specified above .

•Weekdays - The system will power up Monday through Friday at the time you specified above.

•Select Days - The system will power up on days selected above at the time you specified above.

NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled.

Allows you to define the controls when Deep Sleep is enabled.

•Disabled

•Enabled in S5 only

•Enabled in S4 and S5

This option is disabled by default.

Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed.

This option allows you to enable USB devices to wake the computer from standby.

•Enable USB Wake Support - This option is enabled by default.

This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply.

This option lets you block entering to sleep (S3 state) in operating system environment.

•Block Sleep (S3 state) - This option is disabled by default.

This option is disabled by default. If this option is enabled, the feature will periodically sense the nearby wireless connection while the system is asleep. The Smart Connect will synchronize the email or social media applications that are open, when the computer enters the sleep state.

Option	Description

Numlock LED	Specifies if the NumLock function can be enabled when the system boots. This option
	is enabled by default.
Keyboard Errors	Specifies whether keyboard related errors are reported when it boots. This option is
	enabled by default.

48

Image 48

Dell W04C owner manual POST Behavior

Contents

Regulatory Model W04C Regulatory Type W04C002 Notes, Cautions, and Warnings Contents 2 Removing and Installing Components1 Working on Your Computer Installing the Antenna Module 3 System Setup4 Technical Specifications 5 Contacting DellWorking on Your Computer Before Working Inside Your ComputerRecommended Tools Turning Off Your Computer2. Click Shut Down After Working Inside Your Computer Important InformationRemoving and Installing Components System OverviewFigure 1. Inside View 1. Follow the procedures in Before Working Inside Your Computer Removing the VESA StandInstalling the VESA Stand 4. Follow the procedures in After Working Inside Your ComputerRemoving the Back Cover 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Back Cover Removing the Memory4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Memory 5. Follow the procedures in After Working Inside Your ComputerRemoving the VESA Mount Bracket 1. Follow the procedures in Before Working Inside Your ComputerInstalling the VESA Mount Bracket Removing the Power and On-Screen Display OSD Buttons Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power and OSD Buttons Board Removing the System-Board Shield4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the System-Board Shield Removing the Converter Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Converter Board Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Optical Drive5. Slide and lift the optical drive from the computer Installing the Optical Drive 7. Follow the procedures in After Working Inside Your ComputerRemoving the Hard Drive 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Hard Drive Removing the Intrusion Switch 7. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Installing the Intrusion Switch Removing the Wireless Local Area Network WLAN Card4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the WLAN Card Removing the Heat-Sink AssemblyInstalling the Heat-Sink Assembly 5. Follow the procedures in After Working Inside Your ComputerInstalling the Processor Fan Removing the Power-Supply FanRemoving the Processor Fan 4. Follow the procedures in After Working Inside Your ComputerInstalling the Power-Supply Fan 5. Follow the procedures in After Working Inside Your ComputerRemoving the I/O Board Shield 1. Follow the procedures in Before Working Inside Your Computer7. Disconnect the power-connector cable from the system board Installing the I/O Board Shield Removing the Power Supply Unit PSU7. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power Supply Unit Installing the Processor 6. Follow the procedures in After Working Inside Your ComputerRemoving the Processor Removing the SpeakersInstalling the Speakers 4. Follow the procedures in After Working Inside Your ComputerRemoving the System Board System Board Layout1. Follow the procedures in Before Working Inside Your Computer 1. SATA ODD power connector 2. SATA HDD connector 3. SATA HDD power connector 4. SATA ODD connector5. graphic heat sink fan connector 6. intrusion switch connector 7. processor heat sink fan connector 8. camera connectorInstalling the System Board Removing the Heat Sink Graphics Card5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Heat Sink Graphics Card 3. Connect the fan cable 4. Install a. system boardb. power-supply fan c. converter board 5. Remove the heat sink from the system boardRemoving the Antenna Module 5. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Installing the Antenna Module Removing the Display Panel4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer5. Lift the display panel from the chassis Installing the Display Panel Removing the Camera 7. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Installing the Camera 4. Follow the procedures in After Working Inside Your ComputerSystem Setup Boot SequenceNavigation Keys System Setup Options Table 3. System Configuration Table 4. Security Computrace Service from Absolute Software Table 5. Secure Boot Table 7. Power Management Table 6. PerformanceTable 8. POST Behavior POST Hotkeys Option DescriptionOption DescriptionUpdating the BIOS System and Setup PasswordAssigning a System Password and Setup Password Deleting or Changing an Existing System and/or Setup Password5. Press Esc and a message prompts you to save the changes Technical Specifications Volume up/down buttons Windows 7 only, program menus, and Table 17. AudioTable 18. Communications Table 19. CardsTable 22. Ports and Connectors Table 23. PowerTable 26. Physical Dimensions Table 24. Camera optionalWhite light - Solid white light indicates power-on state blinking 8.10 kg to 8.76 kg 17.86 lb to9.19 kg to 9.84 kg 20.26 lb to Table 27. Controls and LightsFeature SpecificationContacting Dell 1. GO to dell.com/support