Manuals / Dell / Computer Equipment / Laptop

Dell W04C owner manual Security

Models: W04C

1 59

Download 59 pages 18.68 Kb

Page 44

Table 4. Security

Option	Description

USB Configuration	This field configures the integrated USB controller. If Boot Support is enabled, the
	system is allowed to boot any type of USB mass storage devices (HDD, memory key,
	floppy).
	If USB port is enabled, device attached to this port is enabled and available for
	operation system.
	If USB port is disabled, the operation system cannot see any device attached to this
	port.
	NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of
	these settings.
Audio	Allows you to enable or disable the integrated audio controllers. By default, the
	Enable Audio option is selected.
Miscellaneous Devices	Allows you to enable or disable various on-board devices.
	• Enable Microphone - This option is selected by default.
	• Enable Camera - This option is selected by default.
	• Enable Media Card - This option is selected by default.
	• Disable Media Card
Table 4. Security

Option	Description

Admin Password	This field lets you set, change, or delete the administrator (admin) password
	(sometimes called the setup password). The admin password enables several
	security features.
	The drive does not have a password set by default.
	• Enter the old password
	• Enter the new password
	• Confirm the new password
	The successful changes in the password will take effect immediately.
	NOTE: If you delete the admin password, the system password also gets
	deleted. You can also use the admin password to delete the HDD password. You
	cannot set an admin password if a system password or an HDD password is
	already set. You must set the admin password first, if you want to use the admin
	password with a system password and/or HDD password.
System Password	Allows you to set, change, or delete the computer password (previously called the
	primary password).
	The drive does not have a password set by default.
	• Enter the old password
	• Enter the new password
	• Confirm the new password
	The successful changes in the password will take effect immediately.
Internal HDD-0 Password	Allows you to set, change, or delete the password on the computer's internal hard
	disk drive (HDD). Successful changes to this password take effect immediately.

44

Image 44

Dell W04C owner manual Security

Contents

Regulatory Model W04C Regulatory Type W04C002 Notes, Cautions, and Warnings 1 Working on Your Computer Contents2 Removing and Installing Components Installing the Antenna Module 3 System Setup4 Technical Specifications 5 Contacting DellWorking on Your Computer Before Working Inside Your Computer2. Click Shut Down Recommended ToolsTurning Off Your Computer After Working Inside Your Computer Important InformationFigure 1. Inside View Removing and Installing ComponentsSystem Overview 1. Follow the procedures in Before Working Inside Your Computer Removing the VESA StandInstalling the VESA Stand 4. Follow the procedures in After Working Inside Your ComputerRemoving the Back Cover 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Back Cover Removing the Memory4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Memory 5. Follow the procedures in After Working Inside Your ComputerRemoving the VESA Mount Bracket 1. Follow the procedures in Before Working Inside Your ComputerInstalling the VESA Mount Bracket Removing the Power and On-Screen Display OSD Buttons Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power and OSD Buttons Board Removing the System-Board Shield4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the System-Board Shield Removing the Converter Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Converter Board Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Optical Drive5. Slide and lift the optical drive from the computer Installing the Optical Drive 7. Follow the procedures in After Working Inside Your ComputerRemoving the Hard Drive 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer Removing the Intrusion Switch7. Follow the procedures in After Working Inside Your Computer Installing the Intrusion Switch Removing the Wireless Local Area Network WLAN Card4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the WLAN Card Removing the Heat-Sink AssemblyInstalling the Heat-Sink Assembly 5. Follow the procedures in After Working Inside Your ComputerInstalling the Processor Fan Removing the Power-Supply FanRemoving the Processor Fan 4. Follow the procedures in After Working Inside Your ComputerInstalling the Power-Supply Fan 5. Follow the procedures in After Working Inside Your ComputerRemoving the I/O Board Shield 1. Follow the procedures in Before Working Inside Your Computer7. Disconnect the power-connector cable from the system board Installing the I/O Board Shield Removing the Power Supply Unit PSU7. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power Supply Unit Installing the Processor 6. Follow the procedures in After Working Inside Your ComputerRemoving the Processor Removing the SpeakersInstalling the Speakers 4. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Removing the System BoardSystem Board Layout 1. SATA ODD power connector 2. SATA HDD connector 3. SATA HDD power connector 4. SATA ODD connector5. graphic heat sink fan connector 6. intrusion switch connector 7. processor heat sink fan connector 8. camera connectorInstalling the System Board Removing the Heat Sink Graphics Card5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Heat Sink Graphics Card 3. Connect the fan cable 4. Install a. system boardb. power-supply fan c. converter board 5. Remove the heat sink from the system board1. Follow the procedures in Before Working Inside Your Computer Removing the Antenna Module5. Follow the procedures in After Working Inside Your Computer Installing the Antenna Module Removing the Display Panel4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer5. Lift the display panel from the chassis Installing the Display Panel 1. Follow the procedures in Before Working Inside Your Computer Removing the Camera7. Follow the procedures in After Working Inside Your Computer Installing the Camera 4. Follow the procedures in After Working Inside Your ComputerNavigation Keys System SetupBoot Sequence System Setup Options Table 3. System Configuration Table 4. Security Computrace Service from Absolute Software Table 5. Secure Boot Table 7. Power Management Table 6. PerformanceTable 8. POST Behavior POST Hotkeys Option DescriptionOption DescriptionUpdating the BIOS System and Setup PasswordAssigning a System Password and Setup Password Deleting or Changing an Existing System and/or Setup Password5. Press Esc and a message prompts you to save the changes Technical Specifications Volume up/down buttons Windows 7 only, program menus, and Table 17. AudioTable 18. Communications Table 19. CardsTable 22. Ports and Connectors Table 23. PowerTable 26. Physical Dimensions Table 24. Camera optionalWhite light - Solid white light indicates power-on state blinking 8.10 kg to 8.76 kg 17.86 lb to9.19 kg to 9.84 kg 20.26 lb to Table 27. Controls and LightsFeature SpecificationContacting Dell 1. GO to dell.com/support