Installing the I/O Board Shield
1.Connect the
2.Place the I/O board shield on the computer.
3.Pass the power connector and fix it to the socket. Tighten the screws that secure the I/O board shield to the chassis.
4.Tighten the screws that secure the power connector to the I/O shield.
5.Place the I/O panel on the computer.
6.Install:
a.
b.
c.VESA mount bracket
d.back cover
e.VESA stand
7.Follow the procedures in After Working Inside Your Computer.
Removing the Power Supply Unit (PSU)
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a.VESA stand
b.back cover
c.VESA mount bracket
d.
e.input/output (I/O) board shield
f.
3.Disconnect the
27