Fisher-Price H4792 manual Assembly, This package contains small parts in its unassembled state

Assembly

IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.

Hubs

CAUTION

This package contains small parts

in its unassembled state.

Adult assembly is required.

Leg Housing Back Base

Button

2 Front Curved Base

Leg

1

• Place the front curved base on a flat surface so that it curves away from you.

• Place the back base on a flat surface, behind the front curved base.

• Position the leg assemblies so that the hubs are facing each other.

• Fit the ends of the legs over the ends of the front and back bases, as shown.

Hint: You may need the help of another adult to help you balance the assembly.

•Place a housing on a flat surface.

•Insert the button end of a leg into the hole in the housing.

•Push the leg in until it “snaps” into the housing.

•Repeat this procedure to assemble the other leg to the other housing.

•Pull the legs to be sure they are secure in the housings. If you can remove them, you have not assembled them correctly. Please re-read and repeat this assembly step.

•Pull the other leg back until it “snaps” into place in the housing.

•Repeat this procedure to “snap” the leg in the other housing into place.

3