WARNING
To prevent serious injury or death:
Parts
IMPORTANT! Please remove all parts from the package and identify them before assembly. The kickstand is packaged within the pad at the factory. Before beginning assembly, please remove kickstand from the pad.
• It is dangerous to use this product on |
an elevated surface. |
• Never use on a soft surface (bed, sofa, |
cushion) since product can tip over and |
cause suffocation in soft surfaces. |
• Always use the restraint until child |
is able to climb in and out of the |
chair unassisted. |
• Never leave child unattended. |
Toy Bar
3 Toys
• Use the upright position only when child |
has developed enough upper body |
control to sit without leaning forward. |
• Never use as a carrier or lift while child |
is seated. Never use the toy bar as |
a handle. |
• Reclined position not recommended for |
children who can sit up by themselves |
(6 months approximately, until 9 kg.). |
CAUTION
This package contains small parts
in its unassembled state.
Adult assembly is required.
2
Cross Brace
2 Retainers with Lock Nut
Pad
Kickstand
Seat Back Tube
Front Tube | 2 Side Rails |
M4 Lock Nut (Inside Retainers) - 2 | |
#8 x 2.9 cm Screw - 2 | #8 x 1.9 cm Screw - 2 |
All Shown Actual Size | |
Note: Tighten or loosen all screws with a Phillips screwdriver. Do not
