Battery Installation

Shown Actual Size
1,5V
LR20 (“D”)
Locate the battery compartment on the bottom of the
vibrations unit.
Loosen the screw in the battery compartment door with a
Phillips screwdriver.
Lift to remove the battery compartment door.
Insert one LR20 ("D") alkaline battery as indicated inside the
battery compartment.
Hint: We recommend using alkalinebatteries for longer
battery life.
Replace the battery compartment door and tighten the screw
with a Phillips screwdriver. Do not over-tighten.
Battery Compartment
+

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Insert batteries as indicated inside the battery compartment.
Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of batteries in a fire. The
batteries may explode or leak.
Never short-circuit the battery terminals.
Use only batteries of the same or equivalent type,
as recommended.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the product before charging.
If removable, rechargeable batteries are used, they are only to
be charged under adult supervision.
6
6