Battery Information

Battery Installation

1.5V x 6

“AAA” (LR03)

SHOWN ACTUAL SIZE

We recommend the use of alkaline batteries for longer battery life.

Your child is bound for a world of adventure!

READY

POWER

All Aboard!

Hook the cars together and place them on the track. Make sure the engine is in front.

Hint: We do not recommend using the engine on carpets. For best performance, use on the track provided or hard,

Train Engine

Locate the battery compartment on the back of the train engine.

Loosen the screws in the battery

compartment door with a Phillips screwdriver. Lift the battery compartment door and insert three “AAA” (LR03) alkaline batteries.

Close the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

IMPORTANT! Under normal use conditions, the batteries in the engine will require replacement more often than the batteries in the remote controller. For additional information, see the troubleshooting section.

Remote Controller

Locate the battery compartment on the side of the remote controller.

• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door and insert three “AAA” (LR03) alkaline batteries.

Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.

LIGHT

BUTTON

flat surfaces.

3-Position Remote Controller

3

2

1

1 OFF

2 FORWARD

3 FORWARD

(With Sound Effects)

Press the power button on top of the engine. The ready light turns on.

Hold the remote controller with the stick facing you. Point the remote controller toward the engine and push the stick forward. The engine moves forward around the track.

To stop the engine, pull the stick backwards to the stop position.

Hints:

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage:

The more you collect, the more

Woo-

Wooooo!

Use

multiple

 

control

remote

vehicles

at once!

Rhhhh!

If you do not operate the remote

controller for a few minutes, the

engine shuts off and the ready

light turns off. Press the engine

power button, and operate the

remote controller to restart.

Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

Insert batteries as indicated inside the battery compartment.

Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.

Never short-circuit the battery terminals.

Use only batteries of the same or equivalent type, as recommended.

Do not charge non-rechargeable batteries.

Remove rechargeable batteries from the toy before charging.

If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

fun it gets!

Multiple track packs used to create this configuration.

Each sold separately & subject to availability.

Toot! Toot!

This toy works best if you have a

clear path between the remote

controller and the engine. Point

the remote controller at the engine.

The maximum range of the remote

controller is about 12 feet.

WARNING

To prevent entanglement,

keep hair away from wheels.

Page 2
Image 2
Fisher-Price H8099 instruction sheet Battery Information, More you collect, the more, Fun it gets