Fisher-Price J1315 manual Problems & Solutions, Problem Solution

Problems & Solutions

Problem	Solution
You hear static or buzzing	Receiver is out of range of transmitter. Move receiver
	closer to transmitter.
	Note: Range varies depending on surrounding
	conditions such as noise levels, physical obstructions
	and signal interference.
	Transmitter power is off. Turn transmitter power on.
	Channel switches are on different channels. Make sure
	channel switches on both transmitter and receiver are
	set to same channel.
	Loose power cord connection and transmitter power is off.
	Check transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off.
	Make sure light switch that controls power flow to wall
	outlet is on.
	Power is off because circuit breaker for room is off.
	Make sure house fuses and circuit breakers are on.
Receiver power indicator does not light	Receiver power is off. Turn receiver power on.
	Batteries in receiver are weak or dead. Replace all
	batteries with three, alkaline “AAA” (LR03) batteries
	or use AC adaptor as power source.
	Power is off because circuit breaker for room is off.
	Make sure house fuses and circuit breakers are on.
	No power to wall outlet and power is off. Make sure light
	switch that controls power flow to wall outlet is on.
Receiver low battery indicator lights	Batteries in receiver are weak or dead. Replace all
	batteries with three, alkaline “AAA” (LR03) batteries
	or use AC adaptor as power source.
Transmitter power indicator does not light	Transmitter power is off. Turn transmitter power on.
	Loose power cord connection and transmitter power is off.
	Check transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off.
	Make sure light switch that controls power flow to wall
	outlet is on.
	Power is off because circuit breaker for baby’s room is off.
	Make sure house fuses and circuit breakers are on.
You can hear conversations or sounds	There is signal interference due to other nursery monitors
from other homes	on same channel or cordless telephone use. Change
	channel switches on both transmitter and receiver to
	eliminate source of interference.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

12