Problems & Solutions

Problem

Solution

Transmitter range indicator green light flashes

Receiver is out of range of transmitter. Move receiver

 

closer to transmitter.

 

Note: Range varies depending on surrounding

 

conditions such as noise levels, physical obstructions

 

and signal interference.

 

Transmitter power is off. Turn transmitter power on.

 

Channel switches are on different channels. Make sure

 

channel switches on both transmitter and receiver are

 

set to same channel.

 

Loose power cord connection and transmitter power is off.

 

Check transmitter power cord plug-to-outlet connection.

 

No power to wall outlet and transmitter power is off.

 

Make sure light switch that controls power flow to wall

 

outlet is on.

 

Power is off because circuit breaker for room is off.

 

Make sure house fuses and circuit breakers are on.

Receiver power indicator does not light

Receiver power is off. Turn receiver power on.

 

Batteries in receiver are weak or dead. Replace all

 

batteries with three, alkaline “AAA” (LR03) batteries

 

or use AC adaptor as power source.

 

Power is off because circuit breaker for room is off.

 

Make sure house fuses and circuit breakers are on.

 

No power to wall outlet and power is off. Make sure light

 

switch that controls power flow to wall outlet is on.

Receiver low battery indicator red light flashes

Batteries in receiver are weak or dead. Replace all

 

batteries with three, alkaline “AAA” (LR03) batteries

 

or use AC adaptor as power source.

Transmitter range indicator does not light at all

Transmitter power is off. Turn transmitter power on.

 

Loose power cord connection and transmitter power is off.

 

Check transmitter power cord plug-to-outlet connection.

 

No power to wall outlet and transmitter power is off.

 

Make sure light switch that controls power flow to wall

 

outlet is on.

 

Power is off because circuit breaker for baby’s room is off.

 

Make sure house fuses and circuit breakers are on.

You can hear conversations or sounds

There is signal interference due to other nursery monitors

from other homes

on same channel or cordless telephone use. Change

 

channel switches on both transmitter and receiver to

 

eliminate source of interference.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

13

Page 13
Image 13
Fisher-Price K4073 manual Problems & Solutions, Problem Solution