Setup | Attaching the Dashboard |
| to a Car Seat |
Power/ | IMPORTANT! This product is designed to attach to most |
car seats. If, after attaching this product to your car seat, | |
Volume | you find that you cannot properly tighten your car seat’s |
Switch | restraint system (as described in the car seat manufacturer’s |
| instructions), DO NOT use this product on the car seat. |
•Slide the power/volume switch on with low volume 
. The system is now active for approximately two hours.
•Press the “steering wheel” to hear a short song. Adjust the volume to a comfortable listening level for your child by either:
-keep the switch on low volume 
.
-slide the switch to high volume 
.
•Close the fasteners on the cover.
Hint: If the toy is not used for more than two hours, it turns off automatically. To reactivate the toy, simply press the “steering wheel”.
Car Seat |
|
Restraint System | Flat Edge |
|
Crotch
Strap
IMPORTANT! Before attaching the dashboard to your car seat’s restraint system, check to be sure the car seat restraint system is securing your child properly! Check all restraint system belts (shoulder, lap, crotch, etc.) by pulling on them. The straps should not pull more than one inch (two fingers) away from your child.
•Position the dashboard with the flat edge towards baby.
•Wrap the dashboard straps around the crotch strap (of the car seat restraint system) and fasten.
Hint: This toy does not fit tightly to your car seat restraint system, so it does not interfere with securing your child in the car seat.
© 2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. | PRINTED IN CHINA |
