PARTS
Target
PinBall
Tube with Tapered End and
Regular End (Upper)
Net
2 Tubes with Tapered Ends
(Upper and Lower)
•Please keep this instruction sheet for future reference, as it contains important information.
•Adult assembly is required.
•Tool needed for assembly: Phillips Screwdriver (not included).
•Hand pump (not included) and inflation pin (included) required to inflate the soccer ball.
•Requires three “AAA” (LR03) alkaline batteries (not included) for operation.
•Please remove all parts from the package and identify them before assembly.
2 Side Tubes
Tube with Tapered End and Regular End (Lower)
M5 x 28 mm Screw | M5 Lock Nut |
BOTH SHOWN ACTUAL SIZE
Note: Tighten and loosen all screws with a Phillips Screwdriver.
Do not over-tighten the screws.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA | 2 |
