ASSEMBLYF
22 |
•Insert four #8 x 3/4" screws into the base of the windshield/dash. Tighten the screws.
Dash
23 | DASH VIEW |
|
•Insert two #8 x 3/4" screws into the sides of the windshield/dash. Tighten the screws.
•Close the doors on the vehicle.
IMPORTANT! Turn the vehicle on its side or over to complete | ||||||
assembly steps |
|
|
|
|
|
|
| A |
|
|
|
| |
|
|
|
| B |
| |
Steering | Metal |
|
| |||
Vehicle | ||||||
Column | Bar Hole | Hole | ||||
24 | BOTTOM VIEW |
|
•Wipe the steering column with a paper towel to remove any excess lubricant.
•First, insert the straight end of the steering column down through the hole in the metal bar A ; then through the hole in the vehicle floor B ; and finally, out through the hole in the dash.
Steering
Column
Steering
Rod
25 |
•Insert the curved end of the steering column through the hole in the steering rod.
15 | |
|
|
