ASSEMBLYF
13
14
36 |
•Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
•First apply the inside edge of a label to the back end of the vehicle. Next, apply the outside edge of the label to the side of the vehicle. Then, smooth the center of the label. (The edges will overlap slightly.)
•For best results, avoid repositioning a label once it has been applied to the vehicle.
Wings
Taillight Tabs
38
•Fit the wing tabs into the slots in the top edge near the rear of the vehicle.
Hints:
•There is a left and right wing. They are designed to be assembled one way.
•Make sure the tabs on the top of the taillights fit into the bottom of each wing.
Taillights
37 |
• Fit the taillights (left and right) onto the rear of the vehicle.
39 |
• Insert two #8 x 3/4" screws into each wing. Tighten the screws.
19 | |
|
|
