Assembly
Rear Wheel Hub
5 | Rear Wheel Cap |
•Fit the tabs on a rear wheel cap into the slots in the rear wheel hub. Push to "snap" the rear wheel cap in place.
•Repeat this procedure to attach the other rear wheel cap to the other wheel hub.
Pedal Axle Tab
Pedal Hub
Fork Arms
Front Wheel
Assembly
Groove
Fork Cover
Pedal Axle
7
•Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
•Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x ¾" screws into the fork cover and tighten.
•Repeat this procedure to attach the other fork cover to the other fork arm.
6 | Pedal Hub |
|
•Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.
•While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
•Press the pedal hubs into the center of the front wheel until they are fl ush with the surface of the front wheel.
•Repeat this procedure on the other side with the other two pedal hubs.
Lower Steering Ring
8
• Fit the lower steering ring onto the frame, as shown.
5
